The Art of Mastering

Undergoung Utilities and their Standard Colors

Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. You dont want something disastrous to occur. If you hit any of the underground utility lines while digging then you can be fatally injured. It can also interrupt services in your area where the line is located. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

Sometimes, even if the lines are marked accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. With this machine, companies can easily locate utility lines. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

Today, utility lines are marked with different colors for easy identification. The colors below indicate the kind of utility uses it.

If you see white lines, then these are proposed excavation sites. It locates areas that will be excavated in the near future.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is perfect for electric works because it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Communication, alarm, signal lines, cable, or conduit use orange lines. Blue lines are used for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. Green lines are used for sewer and drain lines. You can derail any project for a long time if you hit these lines.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.